返回首页

沧州市防水材料厂

本站导航

新闻动态

当前位置:网站首页 > 新闻动态 > 详细信息
坡屋面防水自粘卷材大面施工
添加时间:2019/11/15 14:49:20     浏览次数:
卷材厚度2mm,单面自粘,收口部位采用水泥浆湿贴,其余部位采用干贴,要求与基层满粘;搭接长度为不小于80mm,搭接部位卷材应为双面自粘。卷材上口必须全部收入泛水槽内,并固定牢固,泛水槽最低不得低于瓦屋面以上300mm。
The thickness of coiled material is 2mm, single side is self-adhesive, the closing part is wet pasted with cement paste, and the rest parts are dry pasted, which is required to be fully bonded with the base; the overlapping length is not less than 80mm, and the coiled material at the overlapping part is double-sided self-adhesive. The upper opening of the coiled material must be completely put into the gutter and fixed firmly. The gutter shall not be less than 300 mm above the tile roof at least.
上一页  防水透汽膜  
下一页  构造防水则是采取合适的构造形式
  • 关于我们
  • 新闻动态
  • 案例展示
  • 网上订单
  • 联系我们
  • 产品分类1
  • 产品分类2
  • 产品分类3

Copyright © 技术支持:遨游网络

  • 联系我们
  • 网上订单
  • 工程案例
  • 本站导航

搜索

  • 关于我们
  • 新闻动态
  • 案例展示
  • 网上订单
  • 联系我们
  • 产品分类1
  • 产品分类2
  • 产品分类3